Premier CCTV-4245B, Инструкция по эксплуатации

Страница: 25 / 32

8
2. Press and hold the Power button to turn ON the parent unit. The Power LED should
light up green.
Press and hold the Power button to turn OFF the parent unit.
Once the Baby unit and Parent Unit have been switched on, the display of the parent unit
will show the captured video from the Baby unit.
5 Using the Baby Monitor
5.1 Fine tuning
•
Place the camera in a convenient location, point the lens of the camera to the
observation area.
• Move the head of the baby unit up or down to your desired position and ensure the
parent unit has good reception of the baby.
Do not place the camera within the babies reach!
5.2 Night vision
The camera has high-intensity LED’s for picking up clear images in the dark. When the
built in photo sensor measures the ambient light level as low, the LED’s will automatically
activate and it will show black and white screen.
5.3 Melody function
You can remotely activate a melody to be played on the baby-unit.
• Press Play/Pause button (1) once to start the melody playback. Press this button again
to pause the melody playback.
• During Melody playback, press
Melody Select
button (2) to select the melody. You can
select;
! or ! 1, ! 2, ! 3, ! 4 and ! 5. Selecting ! will play back all melodies sequentially.
Selecting others will play back individual melody.
• In the first 10 seconds of melody playback, pressing Up (3) or Dow n (4) button can
adjust the melody volume in baby side.
Note: After this 10 seconds, pressing Up (3) or Dow n (4) button will adjust the volume of
the parent unit.
5.4 Talk back function
•
Press and hold Talk back button (12) to talk to the baby. The Talk icon will be shown
at the left lower corner of the LCD screen. The Music playback will stop if Talk back is
activated.