Premier 3503C4, Инструкция по эксплуатации

Страница: 10 / 11

9
A
A
A ABNORMITY
BNORMITY
BNORMITY BNORMITY AND
AND
AND AND SOLUTION
SOLUTION
SOLUTION SOLUTION
Fault Cause Solution
Light on, but motor
does not work
The leaf blocked Get rid of the blocking
The capacitor damaged Replace capacitor
The motor jammed bearing
damaged Replace motor
The internal with of motor off or
a bad smell from the motor Replace motor
Light does not work,
motor does not work
Beside the above mentioned, check the following:
Light damaged Replace lights
Power cord looses Connect the wires as per
the electric diagram
Oil leakage
One way valve and the air
ventilation entrance are not
tightly sealed Take down the one way
valve and seal with glue
Leakage from the connection
of U-shaped section and
cover Take U-shaped section
down and seal with soap
or paint
Shake of the body The leaf damaged and causes
shaking Replace the leaf
The motor is not tightly
hanged Lock the motor tightly
The body is not tightly
hanged Fixed the body tightly
Insufficient suction The distance between the
body and the gas top too long Readjust the distance
Too much ventilation from
open doors or windows Choose a new place and
resemble the machine
The machine inclines The fixing screw not tight
enough Tighten the hanging
screw and make it
horizontal
The hanging screw not tight
enough Tighten the hanging
screw and make it
horizontal