Premier View 20-CM-32AH, Инструкция по эксплуатации

Страница: 4 / 6

6 7
3 INSTALLATION
※
Based on the condition and place, the installation procedures
could be varied.
(1) Determine a position and a direction of installation so that the rear
view can be eff ectively seen on the monitor screen.
(2) Fix the camera bracket to the vehicle using the provided adhesive
tape and tapping screws with spring washers.
(3) Fix the camera between the camera bracket and sunvisor using
machine screws and adjust the angle of camera and fasten the
screws fi rmly.
(4) Run the cable from the monitor to the camera.
Monitor
(Option)
Extension Cable
70ft (22m)
Camera
4 CONNECTION
CAMERA CONNECTOR
1. POWER IN (DC +12V)
2. HEATING B+ (DC +12V)
3. N.C
4. VIDEO OUT
5. AUDIO OUT
6. NOR/MIR
7. GND
⑥
TAPPING SCREW T1 M4.0 X 10 (3ea)
SPRING WASHER M4 (3ea)
FLAT WASHER M4 (3ea)
⑤
Before making the connection, disconnect the ground terminal of the car battery
to avoid short circuiting.
Before inserting plug, should check pin specifi cation and the plug should insert
to jack or connector fi rmly.
If forced insert wrong direction, it may cause malfunction.
When connect extension cable, turn it right direction as described arrow.
MACHINE SCREW M3.0 X 5 (2ea)
MACHINE SCREW M3.0 X 7 (4ea)