PREMIER TECH PT-PC2I, Инструкция по эксплуатации

Страница: 13 / 32

13
a. If you don’t select a heat zone within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
c. If slide along the
“—” , power will vary from stage 2 to stage 8.
Press “ - ” , power will decrease by one stage each time till stage 0.
Press “ + ” , power will increase by one stage each time till stage 9.
If the display flashes alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off.
2. Turn the cooking zone off by touching the “ - ” and scrolling
down to “0”. Make sure the display shows “ 0 ” .
3. Turn the whole cooktop off by touching the “ON/OFF” control.