Premier Tech Aqua
7/20
Ecoflo
®
Polyethylene
–
Installation Guide Ontario
Edition: 2020-06-23
Lids
•
Access port for maintenance and inspection
–
main and secondary access;
•
Air intake from the main lid provides proper air flow through the system;
•
Secure both openings with bolted assemblies.
Insulating boards
•
Thermally insulate the system;
•
Guides airflow into the shell's air ducts (main access);
•
Seals the system (main access).
Shell
•
Encloses the system's components;
•
Allows connection of water and air pipes;
•
Collects the treated effluent (STB models).
Central support
•
Supports the tipping bucket and one end of the distribution plates;
•
Allows air circulation between bottom and top of the filtering media.
Support rails
•
Support the other end of the distribution plates.
Tipping bucket
•
Evenly distributes the wastewater on both sides of the filtering media;
•
Creates hydraulic events required for proper distribution of the wastewater on the distribution plates and, at
the same time, contributes to the self-cleaning of the plates.
Distribution plates
•
Allow even distribution of the influent on the surface of the filtering media.
Filtering media
•
Consists of a natural fibre-based filtering media;
•
Promotes good biomass growth which is essential to biological treatment of the wastewater;
•
Physically filters the solids contained in the influent;
•
Maintains adequate humidity level required for biomass viability when there is no water going through the
system for a certain amount of time.
Treated effluent collection area
•
Allows proper drainage of the treated effluent;
•
Allows air to circulate under the filtering media.
Pump vault / secondary access (if applicable)
•
Allows air circulation between bottom and top of the filtering media;
•
Allows access to the base of the system to collect a sample of the treated effluent;
•
Encloses the following pumping equipment: pump, screen filter, On/Off float and alarm float (models with
integrated pump);
•
Allows treated effluent to be sent towards the available disposal method (models with integrated pump).
If you have a problem, or a part is defective or missing, do not hesitate to contact
our customer service department at 1 800 632-6356.
