UFA-XL
Page 7
Installation Instructions
Installing the Display on the Support Tubes
Attaching the Upper UFA-XL Mounting Bracket
WARNING
:
THE FOLLOWING STEPS MAY BE PERFORMED BY THREE PEOPLE.
FAILURE TO DO SO WILL RESULT IN PHYSICAL DAMAGE TO THE
DISPLAY AND/OR THE PERSONNEL PERFORMING THESE STEPS.
1. Have two people, one on each side, pick up the displays.
2. Align the UFA-XL brackets above the two support tubes and
lower the unit down.
NOTE
: In some cases, the support tubes will not voluntarily
align with the upper UFA-XL mounting brackets. In
these cases, the third person must squeeze, or spread,
the support tubes together. When the holes and the
support tubes are aligned, lower the unit down onto the
support tubes.
3. After the appropriate height has been determined, use the 5/32” Allen wrench (supplied) to tighten the set screws on the mounting
brackets.
