www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
1B
1A
2
3
Included components
TTS-BASE-L
Installation Guide
x7
x1
x7
x7
x1
x1
x5
x2
x2
M6 x 16mm Truss
Screw
M4 Allen Key
Adhesive Bumper
Vinyl Feet
Aluminum Tube
Base
Top Stand Base
M5 x 30mm Flat
Screw
M8 x 10mm Set
Screw
#10 x 1 3/4” Flat
Wood Screws
(7)
M6 x 16 mm Truss Screw
(7)
Adhesive Bumper
(2)
M8 x 10 mm Soc Set
(5)
M5 x 30 mm Flat Screw
(7)
Vinyl Feet
(1)
Top Stand Base
(1)
Aluminum Tube Base
Page 2
Maximum Weight:
150 lbs.
Flip the Top Stand Base over and install the seven (7) Vinyl Feet
using seven (7) M6 x 16 mm Truss screws.
Flip the Top Stand Base over and install the seven (7) Adhesive
Bumpers.
Install the Aluminum Tube Base using five (5) M5 x 30 mm Flat Screws.
T40 Installation
1) Install the T40 (not supplied) into the Aluminum base tube.
2) Secure the T40 using the two (2) M8 x 10 mm Set Screws.
Tighten the M8 x 10 mm set screws using a 5/32 or M4 Allen
Key.
(1) T40
High Profile
Low Profile
OR
Parts list (2)
Griplates™ (4)
Thread depth
indicator (1)
Aluminum block (1)
Mounting brackets (2)
Base (1)
Tubes (2)
Allen key (1)
M5 x 10 Phillips
screws (2)
M5 x 30 Phillips flat
head screws (5)
Socket head
Screws (6)
Tube caps (2)
Wood screws (2)
(Optional use)
Rubber vinyl (4)
Rubber feet (4)
(used on the PSD-TTS only)
M6 Phillips
screws (4)
Back cover (1)
