SHLF-VC
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 5
Installing the SHLF-VC
Introduction
Assembling the Video Conference Shelf
Step 1
The SHLF-VC video conference shelf is designed to easily hook into Premier Mounts’ P-Series mounts. It has a
3-inch mounting slot that holds a wide variety of video conferencing cameras.
Please read through the safety instructions before installation. The P-Series mount must be attached to the wall
without the flat-panel before installing the SHLF-VC.
Use two (2) M6 x 8mm pan combo screws to fasten the video conference shelf to the video conference shelf adjustable
bracket.
The screws should go in the top left and right screw holes of the video conference shelf adjustable bracket.
Step 2
Attach one (1) M6 x 20mm knurl knob to the back of the video conference shelf assembly.
The knurl knob should go in the center pem nut in the back of the video conference shelf adjustable bracket. It will
be used to balance and stabilize the video conference shelf assembly against the wall.
M6 x 8mm pan combo
screws
M6 x 20mm knurl knob
