Display Orientation
The RTM-S will allow the user to adjust the display a full 360°.
Page 10
Installation Instructions
RTM-S
BEFORE ROTATING THE RTM-S, MAKE SURE THAT THE M6 KNURL KNOB IS
SECURELY FASTENED TO THE RTM-S. ALSO, PLEASE MAKE SURE YOU ALLOW
ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROTATION.
Step 1.
To adjust the RTM-S, rotate
the display either clockwise
or
counter-clockwise.
Step 2
. Tighten the two Phillips
head locking screws (see
Step 5, Page 10).
Tilt Positioning
M6 Knurl Knob
Step 1.
Once the position has been locked down, use an Allen wrench to take off the crank handle.
Step 2.
Once the crank handle has been removed, re-attach the crank handle, facing the opposite direction. This is the storage
position for the handle.
The RTM-S has the ability to tilt 10°
down.
The RTM-S has the ability to tilt
35° up.
Rotate the crank handle to tilt the
RTM-S:
Down - Clockwise
Up - Counter-Clockwise
Crank Handle Storage Position
