PWM-F110
Page - 13 -
Installation Manual
9.
Level and secure the plate to the wall with the reference arrow facing up to the ceiling.
10. Use a minimum diameter of 5/16” x 2 ¼” large concrete wedge anchors (commercially available) –
(Figure 14).
CAUTION:
Do not over tighten the wedge anchors bolts.
NOTE
:
Use a minimum diameter of 5/16” x 2 ¼” long wedge anchors (commercially available).
Figure 14
NOTE
: Although not depicted in the illustrations shown above, the width of this wall mount will encompass
four wall studs (three wall studs if 24” apart).
(4) 5/16" x 2 ¼”
wedge anchors
(commercially
available)
Wall Plate
(4) 5/16" x 2 ¼”
wedge anchors
(commercially
available)
