Page 12
Installation Instructions
RTM-L
The RTM-L is shipped with a safety knurl knob already installed. If the user decides to incorporate the optional security hardware, the
following steps will show the user how to effectively remove the safety knurl knob and install the optional Lock-It™ hardware kit.
The M6 security head screw will be installed after the RTM-L has been fully assembled. Installation of the M6
security head screw prior to completing assembly will not allow the RTM-L to function properly.
Lock-It™ Security Hardware Pack
M6 x 12mm Security Head Screw
(Qty 1) and Lock Washers (Qty 2)
Security Allen Wrench
(Qty 1)
Step 1
Remove the RTM-L from the packaging
and remove the existing safety knurl knob.
Remove the universal bracket bar.
Step 2
Place the two lock washers onto the
M6 x 12mm security head screw.
Place the M6 x 12mm security head
screw onto the security Allen wrench
and insert into mounting point.
Step 3
Once inserted into the mounting point, fully
tighten into place using the security Allen
wrench.
Step 4
Once the M6 security head screw has
been installed, re-insert the safety
knurl knob. Installation completed.
This will prevent the display from
being removed from the RTM-L as-
sembly.
Safety Knurl Knob
Universal Bracket Bar
M6 Security Head Screw and Lock
Washers
Allen Wrench
Safety Knurl Knob
M6 Security Head Screw and Lock
Washers
