
PCM-MS2
Page - 7 -
Installation Manual
Finding the Center of the Plasma Display
Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure
to do so could result in serious personal injury and possible damage to the flat panel.
Invert the flat panel place it on a soft, flat surface to prevent damage to the flat panel. Use a blanket, foam, etc. Failure to
do so will result in damaging the flat panel. Do not lay the flat panel on the floor without any protection to the glass. The
flat panel is heavy and fragile. At least (2) qualified personnel are strongly recommended for installation of this product.
Failure to do so could result in serious injury and possible damage to the flat panel.
Step 1.
Once the flat panel is inverted, use a measuring tape to find the center of your flat panel measuring from outside to outside of
the
chassis.
Step 2.
Using a pencil lightly mark the center of your flat panel.