PBC UNIVERSAL PROJECTOR MOUNT
Installation Manual
Page 8
Bracket Installation
Only attach to the projector manufacturer’s specified mounting points on the projector chassis with a
minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer
as well as the safety instructions outlined in this manual.
The two-piece mounting legs are designed to allow for the positioning of each leg around projector air vents
located on the base of the projector. Where applicable, each leg mount may be shortened by removing the
locking screw. This will allow for a better bracket fit, overall.
For easier installation, the mounting legs should be first mounted to the projector. Each leg should then be
adjusted so that they can mount to the Universal Mount (Figure 3).
Step 1. Locate the mounting points on the bottom of the projector and use the appropriate number of mounting legs.
Step 2. Select the mounting hardware that the projector requires and loosely install the universal mount on the projector.
M3 x 12mm Security
Head Screw
One Piece Leg
Two Piece Leg
M5 Allen Wrench
Inverted Projector
Universal Mount
Leveling Barrel
M6 x 12mm Security
Head Screw
M5 x 12mm Security
Head Screw
M4 x 12mm Security
Head Screw
