Installation
Instructions
Page
7
LPFM5080
Concrete Surface Installation
Step 6.
With the help of an assistant, place a
level on the center of the mounting rail
and level the mount. Mark and drill the
second mounting hole.
Step 7.
Insert one (1) 5/16” x 3” lag bolt and
washer into the mounting hole and
tighten. Repeat for the remaining mounting
points.
Level
Step 1.
Place the wall plate into position against the
wall, keeping it level.
Step 2.
Mark off six holes to be used for securing the
mount and place the wall plate aside.
Level
Mark
Concrete anchors are not supplied. Please
use commercially available hardware.
Follow the installation instructions as
provided with the hardware.
Do NOT over-tighten lag bolts when
attaching the mount to the wall. Improper
installation may result in personal injury
or damage to property.
You must secure the wall plate with a
minimum of four (4) lag bolts (2 for each
stud found).