Installing OPTIONAL Model Specific Spacers
Use commercially available hardware to secure the spacer.
Utilize the same spacer for multiple LMVS installations.
For illustration only. LMVS Spacer will vary.
Multiple LMVS mounts can be installed using model specific
spacers. Simply repeat step one when installing each of the
surrounding LMVS mounts. Use one spacer for each 2x2
installation by mounting it to the wall, or utilize the same spacer as
many times needed to complete an unlimited LMVS large matrix
video wall.
1. Plumb and level and mark each corner where the LMVS will
be mounted (or secure to the wall).
2. Install the second mount working in a horizontal direction.
3. Square, Level, and Plumb.
4. Repeat this step for each mount horizontally
1) Mount the LMVS to the desired location.
2) Align and Level the spacer to the corner register tabs
of the mount.
Level
For ease of installation
Model-specific spacers are availible for most flat-panel
displays. Engineered with the intent of significantly reducing
installation tim on large video wall array. Contact Customer
Service to inquire about model specific spacers.
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
LMVS
Page 6
12
14
13