Installation Guide
INW-UNIFM
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100 | Europe +44 (0) 24 7664 4105
Page 7
Universal Spacer Installation
Flat Panel
Universal Washer
Universal Spacer
Mounting Bracket
Mount Point
Mounting Screw
Premier Mounts’ Universal Spacers allow you to attach the mounting
bracket to flat-panels which have recessed or uneven mount points.
Each Universal Spacer adds 1/4” to the distance between the
mounting bracket and your flat-panel.
The Universal Spacers must be stacked and oriented as shown.
The Universal Spacers must only be installed between the
mounting bracket and your flat-panel.
13
Do not overtighten the locking screw.
Please read the following directions to install the security barrel:
n
n
Remove the locking screw from the mounting bracket.
n
o
Place the locking screw into and through the security barrel (see
illustration below).
n
p
Re-insert the locking screw and security barrel into the mounting
bracket.
n
q
Tighten the locking screw and security barrel until seated in the
mounting tab.
Lock-It™ Security
Barrel
Locking Screw
Do not thread the locking screw any further once it is even
with the mounting tab (see illustration to the right). Threading
the locking screw any further will prevent you from safely
attaching the flat panel to the wall plate.
Mounting Tab
Proceed to the “Attaching the Mounting Bracket to the Flat
Panel” section.
14
