9
8
Use UL or VDE listed flexible electrical cord appropriate
for this installation. (Contact your local electrician for more
information).
Push the cord into the plastic guide track, leaving sufficient
length open on either end for full motion of the display on
the slider. Hard wire the cords to universal electrical box.
Repeat for signal cable installation.
Using the spirit level supplied, adjust the stand off of the
lower roller wheels to provide a level vertical for the slider
frame on the wall. Loosen the locking screw at the bottom of
the roller using a Phillips head screwdriver. Install the dome
plug and tighten the bottom lock screw once the slider is
level.