Premier Mounts CTM-MS1 Скачать руководство пользователя страница 2

CTM-MS1

Page 2 

Visit the Premier Mounts website at http://www.mounts.com

 

Installation Instructions

Contact Premier Mounts with any questions: 
(800) 368-9700
[email protected]

Contents

Warning Statements

Weight Limit

Maximum Flat Panel Weight: 

160 lb.

THE WALL STRUCTURE MUST BE CAPABLE OF 
SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF 
THE FLAT PANEL. IF NOT, THE WALL STRUCTURE MUST 
BE REINFORCED. 

 PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND 

COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION 

FOR FUTURE REFERENCE.

 PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED 

IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS 

PERSONAL INJURY, OR EVEN DEATH.

 SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE 

PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.

 PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS 

PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY 

UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, 

DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR 

IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

 

 At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result 

from dropping or mishandling the flat panel.

 

 If mounting to wall studs or ceiling studs, make sure that the mounting screws are anchored into the center of the wall studs 

or ceiling studs. Use of an edge-to-edge stud finder is recommended.

 

 It is recommended that a maximum of ⅝˝ plaster board be used when mounting to wooden studs.

 

 Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there 

 

are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury.

 

 Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a 

water or gas line may cause severe property damage or personal injury.

 

 This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious 

personal injury.

 

 Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of 

impact.

Weight Limit. ............................................................................................................................................................. 2

Warning Statements. ................................................................................................................................................ 2

Installation Tools. ...................................................................................................................................................... 3

Parts List................................................................................................................................................................... 3

Mounting Hardware. ................................................................................................................................................. 4

Nylon Spacers and Flat Washers.

 ............................................................................................................................ 4

Features. .................................................................................................................................................................. 5

Installing the Wall Plate. ........................................................................................................................................... 6

Introduction. ................................................................................................................................................. 6

Installing the Mounting Brackets.

.............................................................................................................................. 8

Selecting the Mounting Hardware. .............................................................................................................. 8

Griplate™ Washer Installation. .................................................................................................................... 9

Nylon Spacer Installation.

 ............................................................................................................................ 9

Attaching the Mounting Brackets to the Flat Panel.

 ................................................................................... 10

Mounting the Flat Panel.......................................................................................................................................... 10

Attaching the Flat Panel to the Wall Plate. ................................................................................................ 10

Safety Knurl Knob Installation.

 ............................................................................................................................... 11

Panelock™ Installation.

 .......................................................................................................................................... 11

Locking Safety Screw Installation.

 ............................................................................................................. 12

Tilt Adjustment.

 ....................................................................................................................................................... 12

Technical Specifications.

 ........................................................................................................................................ 13

Warranty.

 ................................................................................................................................................................ 14

Disclaimer ............................................................................................................................................................... 14

Содержание CTM-MS1















Отзывы: