Installation Guide
TVF -
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
4
Page 9
Multiple Unit Configuration
1. Position the second Horizontal Rail side by side.
2. Place a support screw while maintaining a leveled horizontal
rail to temporary hold in place.
3. Attach the Spacer Bracket and fasten using (8) M5 x 8mm
Flat Head Screw per.
4. Place Vertical Rail (end) at a shifted position shown on top
and securely fasten using (4) M5 X 8mm Flat Head Screw.
5. Install the lower section of the mount as the steps above.
To extend the width of the unit, follow the steps below.
Extend Horizontally
SH
IF
TE
D
Vertical Rail
(end)
the seems between
two units
M5 x 8mm Flat
Head
Horizontal Rail
(1st unit)
Horizontal Rail
(2nd unit)
LASER / LEVEL
Support
Screw
Spacer Bracket
00.0
o
