Premier Mounts Convergent Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 18

Premier Mounts Convergent Series Скачать руководство пользователя страница 2

Installation Guide

- BARCO XT

www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100

Page 2

METHOD 1

METHOD 2

Assemble the mount before installing into

place (for single unit or small array).

Install piece by piece on a located wall (for

multiple unit or large video wall array).

CAUTION STATEMENTS

1. READ ALL STEPS WITHIN THIS MANUAL BEFORE INSTALLING THE MOUNT.

BARCO XT (16:9)

LED SERIES INSTALLATION GUIDE

MUST BE READ IN CONJUNCTION FOR SUCCESSFUL

INSTALLATION. ANY QUESTIONS? CALL PREMIER MOUNTS.

2. INSTALLATION MUST MEETS THE REQUIREMENTS APPROVED BY THE STRUCTURAL ENGINEER.
3. MOUNTING SURFACE REQUIREMENTS: SOLID AND CONTINUOUS PLYWOOD BACKING WITH A

MINIMUM OF 3/4” THICKNESS

.

4. FRAME MUST BE PLUMBED, SQUARED, LEVELED, X, Y, AND Z ALIGNED PRIOR TO INSTALLATION OF

ANY DISPLAYS.

5. ALL LED CABINETS MUST BE

POWER ON TESTED

PRIOR TO ANY INSTALLATION.

6. PREMIER MOUNTS RECOMMENDS THE HANDLING LED CABINETS BY AN INDUSTRY QUALIFIED
PROFESSIONAL.
7. PREMIER MOUNTS IS NOT RESPONSIBLE FOR DEFECTS, MISUSE, OR IMPROPER HANDLING OF THE

LED CABINETS.

Tools for Installation:

00.0

o

Spool of

colored strings

Anti-Static

Gloves

LASER

«
1
2
3
4
...
»

Содержание Convergent Series



















Отзывы:

Нет отзывов