AM80
Page 8
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate (cont'd)
Concrete Installation
Step 1
Place the wall plate (with the two closely spaced
holes on top) against the concrete wall.
®
Use a level to level the wall plate.
¯
Use a pencil to mark the four (4) mounting locations.
Step 2
Remove the wall plate from the wall.
It is recommended that you wear protective
eyewear when drilling.
®
Drill a “pilot hole” in the center of each of the marks
with a power drill and a
5
/
16
˝ masonry drill bit.
Only use a
5
/
16
˝ masonry drill bit when drilling pilot
holes.
Step 3
Insert one (1) plastic wall anchor into a pilot hole.
®
Use a hammer to gently tap it into place.
¯
Repeat
and
®
for the other three (3) plastic wall
anchors.
Make sure the mounting surface area is smooth
and that the plastic wall anchors do not protrude
from the wall.
Step 4
Place the wall plate (with the two closely spaced
holes on top) over the plastic wall anchors.
®
Insert one (1) #14 x 2˝ screw into a pilot hole.
¯
Use a Phillips head screwdriver to tighten the screw.
°
Repeat
®
and
¯
for the other three (3) screws.
Do not overtighten the screws in the plastic wall
anchors.
