AM65
Installation Guide
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
Included Components:
1
2
3A
Solid Concrete Mounting
Decorative End Cap
Plastic Cover
Install the Decorative End Cap to the Mount.
Do not over tighten the lag bolts.
1) Place the Mount on the wall and level the mount.
2) Mark the four (4) mounting locations using a pencil.
3) Drill four (4) marking locations using the appropriate
masonry drill bit and drill gun.
4) Lightly tap the four (4) concrete anchors into the holes.
5) Install the four (4) lag bolts and washers into the
anchor to secure the mount to the wall.
Remove the upper and lower Plastic cover and place it aside.
Level
Anchor
Lag Bolt
Washer
M4 X 12mm
(Qty 4)
M8 X 25mm
(Qty 4)
Mount
(Qty 1)
Level
(Qty 1)
Display Bracket
(Qty 2)
Decorative End Cap
(Qty 2)
Wrench
(Qty 1)
Lag Bolt
(Qty 4)
Anchor
(Qty 4)
Washer
(Qty 4)
Spacer
(Qty 4)
Universal Washer
(Qty 4)
M4 X 25mm
(Qty 4)
M5 X 12mm
(Qty 4)
M5 X 25mm
(Qty 4)
M6 X 12mm
(Qty 4)
M6 X 25mm
(Qty 4)
M8 X 16mm
(Qty 4)
Maximum Flat Panel Weight:
65 lb. / 29.5 kg.
Page 2
