Premier Mounts AM175 Скачать руководство пользователя страница 7

Si la vis que vous sélectionnez est plus longue que la marque du jeu 

maximal de 1/8” sur le paillon ou le cure-dents, comme illustré sur le 

schéma 2 et le schéma 3, veuillez ne pas utiliser cette vis. La longueur 

de la vis doit dévier la marque.

Les vis corrects devraient enfiler facilement dans le point de fixation 

et sortez pas lorsqu'une tension est appliquée.

www.mounts.com  |  North America  800.368.9700  | Interna1-714-632-7100

Page 7

12 

13 

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

AM175

Selecting the Mounting Hardware

1) 

Insert a small straw or toothpick into the threaded inserts found 

on the back of the flat panel.

2) 

Use a pencil to mark the depth of the threaded insert on the small 

straw or toothpick.

3) 

Mark the straw or toothpick 1/8” above the depth of the threaded 

insert, as shown in Figure 1.

4) 

Insert the small straw or toothpick into the remaining threaded 

inserts to compare and verify their depth using the straw or 

toothpick’s 1/8” allowance mark.

5) 

Locate the correct diameter screw for the threaded insert.

 

  If the screw you selected is longer than the 1/8” allowance mark on the 

small straw or toothpick, as shown in Figure 2 and Figure 3, do not use 
this screw. The screw length must not bypass the mark.

6) Test each size of the screws provided. 

 

The correct screws should thread easily into the mounting point and not 
pull out when tension is applied.

¼˝

Flat Panel

Universal Washer

Universal Spacer

Mounting Bracket

Mount Point

Mounting Screw

Premier Mounts’ Universal Spacers allow you to attach  the mounting bracket 
to flat-panels which have recessed or uneven mount points. Each Universal 
Spacer adds 1/4” to the distance between the mounting bracket and your flat-
panel.

The Universal Spacers must be stacked and oriented as shown.

The Universal Spacers must only be installed between the mounting 

bracket and your flat-panel.

Universal Spacer Installation (Optional)

If  your  flat  panel  has  uneven  mounting  points,  or  recessed 

mounting points, please use the provided universal spacers.

Si votre écran plat comporte des points de montage inégaux, 

ou  encastrés,  veuillez  utiliser  les  entretoises  universelles 

fournies.

Содержание AM175













Отзывы: