Page 3 of 3
D00189 Issue 2
REL 38422
CONNECTION DIAGRAM:
Trigger cable is to be connected to the positive input to the vehicles reverse lamp, this enables automatic
activation of the reverse camera system when the vehicle is placed into reverse gear.
INSTALLATION INSTRUCTIONS:
•
Only use cables, and fixing kits as supplied with this kit.
•
Ensure monitor and camera are fitted securely in locations that would not cause vehicle operation to become hazardous.
•
Avoid routing cables adjacent to high heat sources such as, engine block, exhaust.
•
Take care not to trap or abrade cables.
•
Protect cables from sharp metal edges.
•
Ensure correct rated connections are used for trigger cables.
Premier Hazard Limited
Bessingby Industrial Estate
Bridlington, East Yorkshire
YO16 4SJ
England
Tel : +44(0) 113 239 1111
Fax : +44(0) 113 239 1131
e-mail : [email protected]
www.premierhazard.co.uk
