Active carbon filter
Remote control
Round cap for filling the hole in wall window
/
.
Outdoor adaptor for insertion over hose and into hole in
-
the wall window
/
.
INSTALLATION
This unit is a portable air conditioner which can be moved from room to room
,
.
Using the adaptor
Cut a
mm diameter hole in the
130
wall or window using the
,
appropriate tools and safety
equipment
.
Feed exhaust hose through the
window or wall and attach the
outdoor adaptor from the outside
as shown
.
When not in use cover the hole
,
with the cap provided.
Installing the exhaust hose
Use only the hose provided and clip exhaust hose and unit adaptor to the
back of the air conditioner
.
Avoid kinks and bends in the
exhaust hose as this will cause
expelled moist air to build up
causing the unit to overheat and
shut down
.
The hose may be extended from
300
1500
,
mm to
mm but for
maximum efficiency use the
shortest length possible
.
WARNING
!
Installing the carbon filter
1.
Remove the filter frame from the
unit
.
2.
Remove the active carbon filter
from its plastic bag
.
3.
Insert the active carbon filter into
the back of the unit
.
4.
Re fit the filter frame inside the
-
unit
.
Wall or window
outdoor adapter
Do not replace or extend the hose
.
as this could cause the unit to malfunction
Rubber Plug
(
)
installed on unit
Adaptor for insertion ov er hose
-
hole in the wall window
/
).
an d into window
spacer or into
(
6
7