BS PLUG WIRING
Wiring Instructions: Should it be necessary to change the plug please note the wires in
the mains lead are coloured in accordance with the following code :
BLUE - NEUTRAL
BROWN - LIVE
1. The
BLUE
wire is the
NEUTRAL
and must be connected to the terminal that is
marked with the letter N or coloured BLACK.
2. The
BROWN
wire is the
LIVE
and must be connected to the terminal that is marked
with the letter L or coloured RED.
3.
Neither wire
is to be connected to the terminal which is marked with the letter E or
or coloured
GREEN
OR
GREEN/YELLOW
.
4.
Always ensure that the cord grip is positioned and fastened correctly.
If a 13A (BS 1363) fused plug is used it must be fitted with a 3A fuse. If in doubt consult a
qualified electrician.
Please read this User Guide carefully before using:
Do not use your humidifier in a closed room; excessive moisture may build up if there is
insufficient ventilation in the room. If moisture forms on the walls or windows you should
turn the humidifier off or decrease the output as the room has plenty of moist air and
additional moisture may cause damage.
Locate your humidifier in an area inaccessible to children.
Never direct the mist spray outlet (1) directly towards electronic equipment, a wall or piece
of furniture.
Do not place your humidifier on a rug, carpet or finished surface that may be damaged by
excess moisture.
Wallpaper and wooden surfaces can be damaged by excessive moisture.
For extra protection place a waterproof pad under the humidifier.
Do not block the mist spray outlet (1).
Do not add any oils or perfumes to the water in the tank.
Parts Description
1.Mist spray outlet
2.Water tank
3.Control panel
4.Water channel
5.Transducer
6.Tank Cap
7.Handle
Main Functions
1. Special construction and plastic materials
reduce the growth of fungus and bacteria
in your humidifier.
2. Automatic switch off and alarm when the
tank is empty.
3. Negative ions can be added to the mist
output that combine with dust, bacteria
and mildew in the air and neutralise them.
Operating Instruction
1. Remove the water tank (2) and turn it upside down.
2. Remove the tank cap (6), fill the water tank with cold water (never use hot
water). Tighten the nut cap and place the water tank onto the base.
3. Check that the mist spray outlet (1) is correctly fitted on the tank so that the
mist is blown out of the front of your humidifier.
4. To turn your humidifier ON press the ON/OFF button. Press it again and the
machine is turned OFF.
5. Press the MODE button to select the moisture output. The Mode I is on
constantly, Mode II is on for 1 minute and off for one minute, Mode III is on for 1
minute and off for 3 minutes. Select the best mode to create a comfortable
humidity in your room. LED indicators show the selected mode. Remember
that during the off periods your humidifier will not produce any mist.
6. Your humidifier can be set to turn off after up to 7 hours by pressing the TIMER
button. LED indicators show the timer setting selected, 1 hour, 2 hours, 3
hours etc.
7. Press the IONS button to add negative ions to the mist output.
8. When all the water in the tank has been used an alarm will sound briefly and
the TANK EMPTY LED will illuminate. Unplug your humidifier, remove the
tank and refill it with cold water.
