21
6)
Sleep Mode
(This Mode is available when using Remote control)
a) The air conditioner is in operation
b) Press
SLEEP
Button, the “
” appears on the VFD.
c) The fan motor of indoor unit runs in low speed
d) When in cooling mode, during the first two hours, the temperature will
be increased 1
o
C per hour. The unit will then operate at 2
o
C higher
than the originally set figure for 6 hours. The temperature will then
return to the originally set figure
e) When in heating mode, during the first 2 hours, temperature will be
decreased 1
o
C per hour. Then temperature will be keeping at 2
o
C
Lower than the original set figure for 6 hours. The temperature will
then return to the originally set figure.
g) When in dehumidify mode, the temperature will not be changed.
NOTE
In exceptional conditions of low temperature and high humidity, condensate
may accumulate at a rate faster than it can be discharged. The symbol
‘
‘ will appear in the control panel. In order to restart the unit it is advised
that the ‘drain port’ is utilized You should use a container of at least 1.5ltr
capacity to collect the condensate. This normally applies when used in mobile
mode.