15. DO NOT insert or allow objects to enter any ventilation or exhaust opening
as this may damage the heater and could cause an electrical shock or fire.
16. DO NOT use the heater in areas where petrol, paint, or other flammable
goods and objects are stored.
17. If the supply cord is damaged it must be replaced by the Manufacturer or
an authorised service centre in order to avoid a hazard.
BS PLUG WIRING
Wiring Instructions: Should it be necessary to change the plug please note the
wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
1. The
BLUE
wire is the
NEUTRAL
and must be connected to the terminal
that is marked with the letter
N
or coloured
BLACK
.
2. The
BROWN
wire is the
LIVE
and must be connected to the terminal that
is marked with the letter
L
or coloured
RED.
3. Neither wire is to be connected to the terminal which is marked with the
letter
E
or or coloured
GREEN OR GREEN/YELLOW
.
4. Always ensure that the cord grip is positioned and fastened correctly.
If a
13A (BS 1363)
fused plug is used it must be fitted with a
13A
fuse. If in
doubt consult a qualified electrician.
Wiring for a 13 Amp Plug (BS 1363)
Please note.
The Earth Terminal is marked with the letter
E
or Earth Symbol .
1.
PRODUCT DESCRIPTION
OPERATING INSTRUCTIONS
•
Carefully remove your heater from the product packaging and retain
box for off-season storage.
•
Please ensure the unit is in the off position before plugging into the
power socket.
•
Place the heater on a firm level surface.
•
Avoid overloading the circuit by not plugging other high wattage
products into the same power socket.
•
To turn on the appliance, move the heat setting switch to the
corresponding position:
When the unit is switched on the blue power on indicator light will
illuminate.
•
To turn off the appliance, push the switch on the dial to the “0”
position.
•
After use unplug from the power socket.
0 -
OFF
I -
LOW heat setting
II -
HIGH heat setting
1. Thermostat
switch
2. Power on indicator light
3. Speed setting switch
3
1
2
