2
2906
Ver. 1 - 06/14
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.
BEFORE USE
Inspect the product including its cable and plug for any signs of damage. If the
product is damaged, DO NOT use it, and contact your supplier immediately.
ASSEMBLY
The unit is supplied in 2 parts and will require some simple assembly before use.
The legs are slotted into sliding clips which are affixed to the horizontal bars on
the main rail. To assemble follow the instructions below;
1. Place the horizontal bars face down on the floor with the fold out
sections folded inwards to the unit.
2. Slide the 2 outer clips on bars 1 and 8 towards the end marked A (see
fig 1) and the 2 inner clips on bars 2 and 7 to the end marked B (see fig
2)
3. Open the leg frame and place the leg arm marked A on the clips at end
A as per figure 1 above. This is the larger of the 2 legs. Firmly push the
leg into place in the C clip in the direction of the arrow.
4. Repeat the action with the leg marked B as per figure 2.
The unit is now ready to use, turn over and place on a flat level surface and open
the legs till they stop at the ends of the horizontal bars and open out the folded
sections.
The unit can fold flat for easy storage, to do this slide the smaller inner leg (B)
towards end A then fold the legs flat against the frame.
A
A
B
B
Fig 1.
Fig 2.
