Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the
product for future reference.
BEFORE USE
You must inspect the product including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your
supplier immediately.
INSTALLATION
Place the appliance on a firm, flat level surface.
If continuous drainage is to be used, remove the bung from the drainage
port (towards the bottom of the tank), and connect a drainage hose to the
port. Use a hose with an internal diameter of 12mm (½"). Make sure that
the hose runs downwards throughout its entire length, and has no kinks.
Otherwise the drainage will not work.
Make sure that the bucket is fitted correctly into the housing.
OPERATION
•
Plug the mains lead into a 13 Amp mains socket.
•
If connecting via an extension lead, make sure that the lead is rated at 6
Amps, and that it is fully unwound.
•
Place the appliance on a firm flat level surface.
+
-
