Page 3
INSTALLATION
Place the appliance on a firm, flat level surface.
If continuous drainage is to be used,
remove the plastic circle shown by the
arrow.
A rubber bung will be visible behind
insde the hole.
Remove the bung, and attache a hose
(not supplied) to the spigot.
Use a hose with an internal diameter of
12mm (½"). Make sure that the hose
runs downwards throughout its entire
length, and has no kinks. Otherwise
the drainage will not work.
OPERATION
•
Plug the mains lead into a 13 Amp mains socket.
•
If connecting via an extension lead, make sure that the lead is rated at
5 Amps or more, and that it is fully unwound.
•
Place the appliance on a firm flat level surface.
•
Switch the appliance on at the mains socket. Then press the
ON/OFF
switch
to start operation.
•
Press the
MODE
button to select the operating mode. Normally, use the
NORMAL setting, change to QUIET to reduce the operating noise, or to
POWERFUL for rapid drying of laundry.
•
Press the
AUTO SWING
button to switch the louvre oscillation on or off.
•
Press the
IONISER
button to switch the ioniser function on or off. The ioniser
generates negative ions which helps to remove dust from the air.
•
Unplug the appliance from the mains when not in use. (Do not disconnect
whilst still operating, press the
ON/OFF
switch to turn the appliance OFF
first)
•
Check the appliance regularly for damage and cease using it immediately if
any damage to the product, the cable or the mains plug is found.
•
The appliance operates best if it is in an enclosed area. Close all doors and
windows, and eliminate sources of additional humiditiy, such as cooking,
clothes drying. Cover fish tanks.
•
The
TIMER
button may be used to cause the appliance to switch OFF after a
period of time, either 1, 2, 4 or 8 hours.
