B
18
Repair and Service Manual
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
699327
Rocker Panel
Tool List
Qty.
Wrench, 10 mm ........................................................... 1
Wrench, 3/8” ................................................................ 1
Socket, 10 mm............................................................. 1
Socket, 3/8” ................................................................. 1
Ratchet ........................................................................ 1
Bit Driver, T-30............................................................. 1
Screwdriver, Phillips .................................................... 1
Bit Driver...................................................................... 1
Drill .............................................................................. 1
Drill Bit .........................................................................1
Rivet Gun..................................................................... 1
Torque Wrench, in. lbs................................................. 1
1.
Drill out the rivet (3) securing the rear of the rocker
panel (5) to the frame.
2.
Remove the lock nut (6), washer (7), and screw (1)
securing the front of the rocker panel (5) to the
fender flare.
3.
Remove the remaining lock nuts (4), spacers (8), and
screws (2) securing the rocker panel (5) to the frame
(Ref Fig. 4).
Be sure to retain the spacers (5) for reuse during assem-
bly.
Assemble in the reverse order of removal using new riv-
ets (3) and lock nuts (4, 6). Tighten the lock nuts (4, 6) to
the torque values below.
Fig. 4 Rocker Panel
Item
Torque Specification
4
45 - 55 in. lbs. (5 - 6.2 Nm)
6
18 - 20 in. lbs. (2 - 2.2 Nm)
1
2
3
4
5
6
7
8
8
Front of Vehicle
PRELIMINARY
