First things first - 11
occur at temperatures below 0 °C (32 °F) or above 35 °C
(95 °F).
The full performance of a new battery is achieved only after
two or three complete charge and discharge cycles. The
battery can be charged and discharged hundreds of times,
but it will eventually wear out. When the operation time
becomes noticeably shorter than normal, check an
authorized reseller to purchase a new battery.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Do not short-circuit
the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip or pen causes direct
connection of the positive (+) and negative (-) terminals of
the battery. (These look like metal strips on the battery.)
This might happen, for example, when you carry a spare
battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
The capacity and lifetime of the battery will be reduced if
the battery is left in hot or cold places, such as in a closed
car in summer or winter. Always try to keep the battery
between 15
°
C and 25
°
C (59
°
F and 77
°
F). A device with a
hot or cold battery may not work temporarily, even when
the battery is fully charged. Battery performance is
especially limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Wireless devices may be susceptible to interference from
the battery, which could affect performance.
Note
Please refer to
www.acer.com
for battery shipping documents.
Содержание TRITON 500
Страница 1: ...USER S MANUAL PREDATOR TRITON 500 ...
Страница 29: ...Recovery 29 3 Click Go to Backup and Restore Windows 7 ...
Страница 30: ...30 Recovery 4 Click Security and Maintenance in the bottom left of the page and click Recovery ...
Страница 36: ...36 Recovery 2 Select the Restore tab and click Get Started to open the Recovery window ...