Predator 69675 Скачать руководство пользователя страница 3

      Page 3

For Pump technical questions, please call 1-800-444-3353.

For engine technical questions, please call 1-800-520-0882.

Item 69675 / 69676        

Sa

Fet

Y

O

Pe

R

ati

O

n

m

aintenan

C

e

Setu

P

8. 

use only lubricants and fuel 

recommended in this manual.

9. 

improper connections to a building electrical 

system can allow electrical current from the 

generator to backfeed into the utility lines.

 Such 

backfeed may electrocute utility company workers 

or others who contact the lines during a power 

outage, and the generator may explode, burn, or 

cause fires when utility power is restored. Consult 

the utility company and a qualified electrician if 

intending to use the generator for back up power.

10. 

Do not operate the Generator before grounding. 

the Generator must be earth-grounded 

in accordance with all relevant electrical 

codes and standards before operation.

Operating Precautions

1. 

CaRBOn mOnOxiDe hazaRD 

using a generator indoors Can Kill 

YOu in minuteS. 

Generator exhaust contains carbon 

monoxide.  This is a poison you cannot 

see or smell. 

NEVER use inside a home or garage, EVEN IF doors 

and windows are open. 

Only use OUTSIDE and far away from windows, 

doors, and vents.

2. 

never use a generator indoors, including in 

garages, basements, crawl spaces and sheds.

 

Opening doors and windows or using fans will NOT 

prevent carbon monoxide build up in the home.

3. 

When using generators, keep them outdoors 

and far away from open doors, windows, 

and vents to avoid toxic levels of carbon 

monoxide from building up indoors.

4. 

if you start to feel sick, dizzy, or weak while 

using a generator, get to fresh air right away. 

The carbon monoxide from generators can 

quickly lead to full incapacitation and death.

5. 

Keep children away from the equipment, 

especially while it is operating. 

6. 

Keep all spectators at least six feet 

from the engine during operation.

7. 

Fire Hazard! Do not fill gas tank while engine 

is running. 

Do not operate if gasoline has been 

spilled. Clean spilled gasoline before starting engine. 

Do not operate near pilot light or open flame.

8. 

Do not touch engine during use. let engine 

cool down before service or storage.

 

9. 

Never store fuel or other flammable 

materials near the engine.

10. 

if the plugged in product operates abnormally 

or unusually slow, immediately stop using the 

generator as a power source.

  Always read and 

adhere to the instruction manual of the product 

to be powered, to make sure that it can be safely 

and efficiently powered by a portable generator.  

11. 

Before connecting an appliance or power 

cord to the generator:  make sure that it is in 

good working order. 

Faulty appliances or power 

cords can create a potential for electrical shock.

12. 

Do not exceed the maximum power rating of 

the generator.

 Make sure that the total electrical 

rating of the all of the tools or appliances plugged 

into the generator at the same time does not 

exceed that of the generator. Check that the startup 

surge will not be beyond the limit of the Generator. 

Power levels between rated and maximum 

may be used for no more than 30 minutes.

13. 

avoid substantially overloading which will 

trip the circuit breaker.

 Exceeding the time 

limit for maximum power operation or slightly 

overloading the generator may not switch the 

circuit breaker or circuit protector OFF, but will 

shorten the service life of the generator.

14. 

Do not attempt to connect or disconnect 

load connections while standing in 

water, or on wet or soggy ground.

15. 

Do not touch electrically energized parts of 

the Generator and interconnecting cables 

or conductors with any part of the body, or 

with any non-insulated conductive object.

Set up Precautions (cont.)

Содержание 69675

























Отзывы: