Predator 68124 Скачать руководство пользователя страница 3

Page 3

For Engine technical questions, please call 1-800-520-0882.

SKU 68124

Save This Manual

Keep this manual for the safety warnings and precautions, 

assembly, operating, inspection, maintenance and 

cleaning procedures.  Write the product’s serial 

number in the back of the manual near the assembly 

diagram (or month and year of purchase if product 

has no number).  Keep this manual and the receipt 

in a safe and dry place for future reference.

Safety Warnings

In this manual, on the labeling, and all other 

information provided with this product:

  This is the safety alert symbol.  It is 

used to alert you to potential personal 

injury hazards.  Obey all safety 

messages that follow this symbol to 

avoid possible injury or death.

DANGER indicates a hazardous situation which, if 

not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if 

not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, 

indicates a hazardous situation which, if not 

avoided, could result in minor or moderate injury.

NOTICE is used to address practices 

not related to personal injury.

CAUTION, without the safety alert symbol, is used 

to address practices not related to personal injury.

Symbol Definitions

Symbol

Property or Statement

RPM

Revolutions Per Minute

HP

Horsepower

WARNING marking concerning Risk 

of Eye Injury.  Wear ANSI-approved 

safety goggles with side shields.

Read the manual before set-up and/or use.

WARNING marking concerning Risk of 

Hearing Loss.  Wear hearing protection.
WARNING marking concerning 

Risk of Respiratory Injury.  Operate 

engine OUTSIDE and far away from 

windows, doors, and vents.
WARNING marking concerning 

Risk of Fire while handling fuel.  Do 

not smoke while handling fuel.
WARNING marking concerning Risk of Fire.   

Do not refuel while operating. 

Keep flammable objects away from engine.

  WARNING! Read all instructions.

 

Failure to follow all instructions listed below 

may result in fire, serious injury and/or DEATH. 

The warnings and precautions discussed in this 

manual cannot cover all possible conditions and 

situations that may occur.  It must be understood 

by the operator that common sense and caution 

are factors which cannot be built into this 

product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Содержание 68124





















Отзывы: