Page 2
For equipment technical questions, please call 1-888-866-5797.
ITEM 62214
Table of Contents
Specifications ............................................. 2
Safety ......................................................... 3
Setup .......................................................... 7
Operation ................................................... 12
Maintenance .............................................. 17
Troubleshooting ......................................... 20
Parts Lists and Diagrams .......................... 24
Warranties ................................................. 30
Specifications
Pressure Washer Specifications
Pump
Axial
Drive
Direct
Maximum Pressure
3100 PSI
Flow Rate
2.8 GPM
Hose Length
25'
Wand Length
21"
Nozzles
Quick Connect 0°, 15°,
25°, 40° + Soap Nozzle
Engine Specifications
Displacement
212 cc
Engine Type
Horizontal Single Cylinder
4-stroke OHV
Cooling System
Forced air cooled
Fuel
Type
87+ octane stabilizer treated
unleaded gasoline
Capacity
0.95 Gallon (3.6 Liter)
Engine Oil
Type SAE
10W-30 above 32° F
5W-30 at 32° F or below
Capacity
0.5 Quart (0.5 Liter)
Run Time @ 50% Load
with full tank
3 hr.
Bore x Stroke
70 mm x 55 mm
Compression Ratio
8.5:1
Rotation
viewed from PTO
(power takeoff - the output shaft)
Counterclockwise
Spark Plug
Type
NGK
®
BP-6ES
NHSP
®
/ Torch
®
F6TC
Gap
0.0275" - 0.0314"
Valve Clearance
Intake
0.0039" - 0.0059"
Exhaust
0.0059" - 0.0078"
Speed
Idle
1800± 50 RPM
The emissions control system for this Engine is warranted for standards set by the
U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB).
For warranty information, refer to the last pages of this manual.
