Precor UBK 800 Скачать руководство пользователя

Страница: 9 / 52

Important Safety Instructions

Radio Frequency Interference (RFI)

The RFID module conforms to the following national

standards defining acceptable limits for radio frequency

interference (RFI).

Federal Communications Commission, Part 15

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a commercial

installation. The equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the owner’s manual instructions, can cause

harmful interference to radio communications.
Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

WARNING

Per FCC rules, changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the
equipment.

Industry Canada

This device complies with RSS-210:2007 of the Spectrum

Management & Telecommunications Radio Standards

Specification. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference

received, including interference that may cause undesired

operation.
This Class A digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

ATTENTION: Haute Tension
Débranchez avant de réparer

Содержание UBK 800





















































Результаты поиска

Содержание UBK 800

Отзывы:

Похожие инструкции для UBK 800

Бренды по названию

Популярные бренды

Precor UBK 800, Сборка и обслуживание: Руководство

Результаты поиска

Содержание UBK 800

Отзывы:

Похожие инструкции для UBK 800

Бренды по названию

Популярные бренды