©2019 Precor Inc. | Rear Delt/Pec Fly RSL 505 | Assembly Guide
6
3
2 M12 x 125 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
2 M12 x 35 mm SHCS
2 washers, 13 mm
Tool: Hex wrench, 10 mm
The lower cross brace connects in two locations to the main
frame . Connect the lower cross brace to the main frame first
from the outside of the main frame with the long,
horizontal
fasteners.
Next, connect the
vertical
fasteners through the top of the low-
er cross brace to the main frame.
4
Tools: Hex wrench, 10 mm
Socket wrench, 19 mm
Torque wrench
Gently rock the frame to align.
Tighten all M12 fasteners to a
torque of 55 ft-lb (75 N-m).
Do not tighten the M10 screws installed in step 2 at this time.
They will be removed temporarily in a later step.
1
4
40
49
41
49
40
1
49
4
41
Moving Parts
Image
Hardware
Instructions
1
1 end cap
1 shoulder bolt
Tool: Hex wrench, 4 mm
Insert right arm assembly shaft
first
into main frame for stability.
Match the labels on arm and main frame. Top with end cap and secure.
30
1
3
31
L
R
R
3
30
31
1
R
