Precor CW-702, Инструкция по сборке

Страница: 9 / 44

CW-702 Assembly Guide
page 9
Assemble the Pads
1. Attach the two Elbow Pads to the Upright Frame
using
four 3-inch buttonhead screws (C)
four
5 ⁄
16
-inch split washer (D)
four
5 ⁄
16
-inch washer (E)
Wrench tighten.
2. Attach the Back Pad to the Back Support using
four 1¼-inch buttonhead screws (F)
four
5 ⁄
16
-inch split washer (D)
four
5 ⁄
16
-inch washer (E)
Wrench tighten.
This completes the assembly of the CW-702.
Clean the Pads and Assembly
To clean the pads, moisten a clean, soft cloth in a
mild solution of soap and water and wipe all the parts
thoroughly. Dry the pads with a clean, dry cloth.
Use the same procedure to clean the main structure.
Frequently vacuum the floor underneath the CW-702 to
prevent the accumulation of dust and dirt.
Assemble the Pads
4 - 3” buttonhead screws
4 - split washers
4 - washers
4 - 1¼” buttonhead screws
4 - split washers
4 - washers
Back Pad
Elbow Pads