Precor Console, Руководство пользователя, Страница: 22 / 101

Choosing a Language
The equipment can display user prompts, text, and user entries in
several different languages. When the equipment is shipped from
the factory, it is set to display English.
Note: Programming prompts are not affected by language
selection. The prompts in this section continue to appear in
English.
1.
2.
1.
2.
At the S E L E C T L A N G U A G E prompt , press OK. Use the
navigational arrow keys to choose a language.
When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in
Accessing Club Programming Mode and Changing the
Settings .
Selecting a U.S. Standard or Metric
Display
The equipment can display measurements in either Metric or U.S.
Standard. The default factory setting is to display U.S. Standard. To
change this setting, perform the following steps:
At the S E L E C T U N I T S prompt, press OK. Use the navigational
arrow keys to select a unit of measure (
U S
or
M E T R I C
).
CAUTION: If you change the Unit of Measure display on a
treadmill, be sure to check the speed setting to verify that it is
correct. Refer to
Treadmill: Determining the Club Speed
Limit .
When you are ready, press OK to accept the displayed setting
and move to the next feature. For other options, refer to the table
in
Accessing Club Programming Mode and Changing the
Settings .
Product Owner's Manual: Club Features 20