C956i, C966i (Gen 06) Treadmill
Page 1-6
Page 6
4.
Press the
OK
key, the upper most group of LED’s will illuminate on the display. Check the
display to ensure that all LED segments are illuminated.
5.
Press the
OK
key four more times to display the remaining LED groups. Check each display
group to ensure that all LED segments are illuminated.
6.
Press the
BACK
key then the key,
KEYBOARD TEST
will scroll across the display.
7.
Press the
OK
key, a representation of all of the keys on the console will be displayed.
Pressing a key on the console will cause the representation of that key to go off. Press all of
the keys on the console to ensure that all of the keys are functioning.
8.
Press and hold the
BACK
key then the key,
HEART RATE
will be displayed.
9.
Grasp both of the heart rate grips on the handlebar, after a couple of seconds the heart rate
will be displayed in the heart rate and smart rate displays.
10. Use chest strap transmitter or a test transmitter to test the wireless heart rate function, after
a couple of seconds the heart rate will be displayed in the heart rate and smart rate displays.
11. Press the
BACK
key then the key,
MACHINE TEST
will scroll across the display.
12. You may now proceed to either the belt speed test or the incline test. Press the key once
to access the belt speed test or twice to access the incline test.
13.
BELT SPEED
test. Press the
OK
key, the console will display the power bits (PWRB), Press
the
SPEED
key to start the treadmill running belt, the display will indicate the power bits,
the elapsed time and the actual speed (in either miles per hour or kilometers per hour
depending on the club parameters setting, see Procedure 2.3).
14. Press the key, the console will display the motor current (AMPS), the elapsed time and
the actual speed.
15. Press the
BACK
key to exit the belt speed test.
16.
INCLINE
test. The console will display the analog to digital (A/D) incline position number
and the incline position in percent of incline. Press the inline , keys to operate the incline
through out its range.
17. Press the
BACK
key to exit the incline test.
18. Press the
RESET
key to exit the hardware validation test.
Содержание C956i
Страница 42: ...C956i C966i Gen 06 Treadmill Page 1 42 Page 42 Diagram 6 8 Belt Guard Mounting Belt Guard Tab Notch ...
Страница 53: ...C956i C966i Gen 06 Treadmill Page 53 Block Diagram 7 2 C956i C966i 120 Vac ...
Страница 55: ...C956i C966i Gen 06 Treadmill Page 55 Block Diagram 7 4 C956i C966i 240 Vac VAC 240 ...
