40
Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
3.
Reposition the adjustable feet as needed.
If you want to …
Then turn the adjustable feet …
Raise the front end of the AMT
Counterclockwise
Lower the front end of the AMT
Clockwise
Figure 23: Location of adjustable feet and jam nuts
Important:
To allow the rear pedestal to fit properly, the
adjustable feet must extend at least 2” (5 cm) below the side
arm supports. Extending the feet before you remove the
spacer block, as described in the section
earlier in this chapter, ensures that they are
positioned correctly.
4.
When you are finished positioning the adjustable feet,
place the unit on the floor. Try rocking it again, as
described in step 1, to verify that it is level.
