Tel: +386 3 4900 800
http://radar-electronics.com/
3700243A
Copyright 2016
Page 1
Product Description
The Preco Electronics
®
PVM510 is a heavy duty IP67 waterproof
monitor with three camera inputs. The PVM510 has the ability to switch
views based on the status of the three trigger inputs. These triggered
inputs allow the monitor to automatically switch to display the camera
view that is associated with the triggered wire, usually the reverse or
turn signals. Upon cancelation of the triggered signal, the monitor
automatically returns to the previously selected camera view.
Safeguard Instructions
Please read the following cautions carefully before using this product.
Following these rules prevent users from damages related to the misuse of
the product
.
Caution:
o
Electrical shock or damage to the product may occur if
machine power is not turned off during installation.
o
Do not install the monitor closer than 6” (15cm) to a heat
emitting source.
o
Do not clean exterior with solvents as they may damage the
product and could potentially cause a fire.
o
Do not mount the unit where it would be subjected to
extreme vibration or shock.
o
Do not place near a magnet as it may cause undesirable
performance.
o
Do not disassemble unit as it will void the warranty.
