Preco PreView WD7102, Руководство по эксплуатации

Страница: 10 / 24

+1.866.977.7326 www.preco.com 3700076F
Copyright 2016
Page 4
Settings Screen (Figure 1.3)
Quick Guide to the Menu Icons:
Volume adjustment
Connect a sensor to the display
Change the passcode
Brightness adjustment
Adjust detection reporting ranges
System installation configuration
Volume Adjust Screen (Optional)
To adjust the volume, press on the speaker icon . Press and move the
slide bar until the appropriate volume is reached. Moving the slide bar to
the left reduces the volume and moving the slide bar to the right increases
the volume. The volume should be set where the display alerts can be heard
above all in cab noises. Max volume is approximately 105dB @ 10CM.
There are four different audible alerts available for use. Press the “Next”
button to cycle between the different alerts. The default “Standard” alert is a
2.0 kHz beeping tone.
The “Touch To Silence” feature allows the operator to acknowledge and
silence the audible alert simply by touching anywhere on the screen. This
feature is enabled by default. To disable this feature press on the box
adjacent to “Disable “Touch screen to silence”.
The display has the ability to make a “chime” sound every few seconds to
notify the operator that there is no object being detected. Press the box
adjacent to “Enable alert when clear” to enable this feature.