Preco Electronics PreView Plus, Руководство по установке

Страница: 20 / 28

+1.866.977.7326 www.preco.com 3700042D
Copyright 2016
Page 15
Standby Feature:
This monitor has a standby feature that allows the monitor display to be off
until an object is detected or until the vehicle is placed into reverse.
Pressing the once will put the monitor into this mode. If any sensor
other than the rear detects an object the monitor will automatically exit
standby and switch to the camera associated with the detecting sensor.
Additionally, any time the vehicle is placed into reverse the camera will exit
standby mode to show the rear camera. After either of these conditions
clear the monitor will automatically go back into standby mode. Standby
mode can also be exited at any time by pressing the button again.
Alarm Acknowledge (ACK) Feature:
The ACK feature allows the operator to acknowledge an alarm when a
sensor detects an object. This is particularly useful when a constant sensor
detection may occur with the vehicle stopped. When the monitor announces
the presence of an object by switching to show the associated camera full
screen* and sounding an alarm, the operator has the ability to silence the
alarm by pressing any buttons except . Pressing the button after
acknowledging the alarm will return the monitor to the home screen, except
when in reverse*.
* Applies to multiple camera systems only