2
Safety Instructions
All power equipment can cause injury or property damage if operated improperly. Please read and
observe the following safety rules and exercise caution at all times when operating equipment.
Read and understand your owner’s manual.
Keep people, children and animals at a safe distance.
Always wear substantial footwear. Do not wear loose fitting clothing that may get caught in
moving parts.
Keep your eyes and mind on your Seeder/Fertilizer and area being covered. Do not let yourself
be distracted.
Stay alert for holes in the terrain and other hidden hazards.
Do not operate close to creeks, ditches or public highways.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
The Seeder/Fertilizer should be stopped and inspected for damage after striking a foreign object.
Any damage should be repaired before using the equipment again.
Follow the maintenance instructions as outlined in this owner’s manual.
Carton Contents
1. Base Assembly
2. Handle
3. Bag of Seed Plates (7)
4. Row Marker Tube
5. Seed Cover
6. Hardware Sack (see page 3)
7. Seed Plate Pouch (Not Shown)
1
2
3
4
5
11
Parts and Support
Please do not return this product to the
store prior to contacting Precision.
At Precision Products Inc. our goal is to deliver
quality, value and outstanding service. If for any
reason our product does not meet your
expectations, please contact us and we will take
care of any problem you may have with this unit.
When ordering replacement parts please have the
model number, part description, part number,
inspector number and date on box, available so that
we can best serve you.
1 (800) 225-5891
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
Lincoln IL 62656
STOP
FERTILIZER ADJUSTMENT SETTINGS
Granular Fertilizer must be free flowing without
lumps.
No. 1 Setting - 1lbs Per 100 ft.
No. 2 Setting - 2lbs Per 100 ft.
No. 3 Setting - 3lbs Per 100 ft.
SEED PLATE SELECTION GUIDE
Selection as to seed size and spacing are found on
your seed plates.
OPERATION
1. To install the desired seed plate, hold the seed
plate at an angle with bottom against the straight
wall in the hopper. Line up the slots in the seed
plate with the raised portions of the hub, hold it
firmly against the inside of the hopper and rotate it
approximately 1/2‖ in the ―ON‖ direction as
indicated by the arrow on the plate until the cam
action locks the seed plate in place on the hub. Do
not force, OFF and ON, directions are indicated on
the seed plates with arrows.
2. Next, set the planting depth with the wedge
shaped furrowing shoe located directly under the
hopper. Note that there are graduations in inches
on the sides of the seed tube. Move furrowing shoe
until top edge is in line with desired planting depth.
Retighten wing nut after adjustment is made. Check
the depth by moving the seeder forward a few
inches.
3. Pour seeds in the seed hopper. CAUTION: Do not
fill the hopper above the center of the seed plate.
4. Pour fertilizer into fertilizer hopper. CAUTION: Do
not over fill the hopper. Allow 1‖ from fertilizer to
top edge of hopper.
5. Adjust fertilizer flow by loosening wing nut on
fertilizer hopper. Slide calibrated plate to desired
setting and tighten wing nut. Before filling, shut off
fertilizer control.
6. Mark out the first row in your garden. Lower the
row marker shaft and adjust the row marker to the
proper width for the next row. You are now ready
to begin planting.
7. To empty seeds, remove plug from seed hopper
by simply putting pressure on center of plug and
pushing inward. Pour seeds into a clean container.
8. Empty fertilizer by placing a clean container
under fertilizer hose, adjust lever to No. 3 setting
and open control, allowing fertilizer to flow into the
container.
9. To remove seed plate, hold pulley and belt
stationary with one hand and rotate the seed plate
approximately 1/2‖ in the ―OFF‖ as indicated by
arrow on top of the seed hopper. Push the seed
plate off the hub through the hole just above the
pulley. It will slip off easily.
MAINTENANCE
1. Keep your seed hopper clean and free from
sand, grit, and seed treating materials.
2. Do not leave fertilizer stored in hopper.
