12
Place the upper limit cam inside the track and se-
cure by tightening the phillips head screw.
Place the end plate onto the end of the track while
routing the travel cable through the slot in the bot-
tom of the end plate. Tighten all (6) set screws in
the end plate.
Tighten the gear rack compression screw.
Connect the travel cable to the charger.
Plug the charger into a 120V outlet.
Loosen the (4) socket head screws on the
sides of the chassis (2 on each side).
Remove the front cover from the footrest
assembly (two phillips head screws).
Limit Cam
End Cap
End Plate
Gear Rack
Compression Screw
Socket Head
Screws
Front Cover
Phillips Head
Screws
