Tel: (888) 545-1254 • Fax: (415) 358-4602 • Email: [email protected]
www.PrecisionRatedOptics.com
5
Installation
Tip Assembly
Installing Tips on Probe
Assembly & Tip Installed Standard
Step 1
Locate tip you want to install and look at the threaded end. This screw acts as a “key” and is already
mounded with the Key Channel. DO NOT try to screw the Key Channel off from the threaded Key,
which might destroy the whole probe.
Step 2
Slightly screw the Key that you need onto the Key Channel.
LCD Monitor Assembly & Controls
Using the LCD Display with the Probe Connect the Probe to the Display
Step 1
Connect the cable from the probe to the monitor using the 4-pin connector on the
bottom of the monitor.
Step 2
Connect the AC power adapter/charger if necessary.
On/Off Control
(Toggle switch) Press upward to turn the unit on, press downward to shut the unit off.
AC Power
Using the DC/AC power adapter has the following advantages: Use external power (DC/AC power adapter/
charger) to power the LCD directly from a DC/AC power source, or charge the battery pack. Both can be
accomplished simultaneously.
Содержание VIP-35
Страница 1: ...VIP 35 Manual Video Inspection Probe...
