1
INTRODUCTION
Your new
PowerClass
C2
subwoofer is part of an exciting line of
loudspeakers from
PrecisionPower. The
PowerClass
subwoofers reflect our commitment to
“Absolutely State of the Art”
performance and flawless sonic quality.
Included in this manual are a number of sample enclosure drawings.
They are by no means the only enclosures to use, but rather a starting
point in the right direction. To determine the correct enclosure for your
needs many factors need to be addressed (amount of power, vehicle,
placement, crossover, etc.) Therefore, as always,
PrecisionPower
recommends that your subwoofer be installed by an Authorized
PowerClass
Dealer.
1. Progressive Butyl Rubber Surround 2. Stepped PolyCarbon Cone
3. Butyl Rubber Flange Gasket 4. Gold Plated 12ga. Binding Post Terminals
5. Deep Draw Steel Basket 6. High Current Silver Plated Tinsel Leads
7. Flat Spider 8. Spider Clamp
9. TIL Voice Coil Former 10. Long Wind 4 Layer Voice Coil
11. 10mm Frontplate 12. Integrated Backplate / Extended Pole
13. Protective Magnet Cover
C2 Structure
C2 Structure
C2 Structure
C2 Structure
C2 Structure
BACK TO CONTENTS
