Set Up Guide for Serial CAT1 and FSX Page 11
D. Disable Main Flight Controls
C1. Disable main flight controls
1. Press the ALT key on your keyboard and choose Add-ons.
2. From the Add-ons choose PFC.
3. In the
Precision Flight Controls
window, choose
Flight Controls
.
4. In the
Flight Controls
tab disable the
Elevator
,
Aileron and Rudder
, by clicking on the enable
box which is opposite of the
F
for filter box.
E. Enable and calibrate trim
NOTE:
Before enabling the Rudder trim, you will need to make sure that your trim is a separate
channel.
5. Go to the
Trims & Steering tab
.
6. Enable the
Rudder Trim
and turn it left to right and see if the indicator is responding.
If your rudder trim is
not
responding:
a. If you rudder trim is not responding, it means that it is not a separate channel and is
connected to the rudder pedals instead. Disable the rudder trim check and set the rudder
trim to the center with your rudder pedals.
